Tips And Tricks

nadia

Increase your hard disk speed....

To speed up your hard disk speed we need to configure a special buffer in the computer's memory in order to enable it to better deal with interrupts made from the disk.

This tip is only recommended if you have 256MB RAM or higher.

Follow these steps:

1) Run SYSEDIT.EXE from the Run command.

2) Expand the system.ini file window.

3) Scroll down almost to the end of the file till you find a line called [386enh].

4) Press Enter to make one blank line, and in that line type

Irq14=4096

Note: This line IS CASE SENSITIVE!!!

Click on the File menu, then choose Save.

Close SYSEDIT and reboot your computer.

Done. Speed improvement will be noticed after the computer reboots.
_________________
♥♥»»««♥♥
♥♥»»N@D!@««♥♥
♥♥»»««♥♥

raanaa

thanxxxxx
_________________
Life isn't about finding yourself. Life is about creating yourself..

active_friend

Thanks for all
_________________
Thanks

orange · Just Born Joined: 03 Oct 2008 Posts: 8 Location: Indonesia

thanks nadia, but what is "Irq14=4096" mean?

how if i have a 5400rpm HDD and 7200rpm HDD, which is most influence according to the seting? can i use another parameter beside 4096??

Guest

yaar...Hum Check Kasay KAray Gay k HamaraY Harddisk KI Spped Increase HO Gayee HAi???

good larka · Just Born Joined: 29 Oct 2008 Posts: 1 Location: karachi

Hum....kasay Check KaraY gay..k Hamari HarD Disk KI Speed IncrEase Ho GaYeE hAi..???

Guest

Thanks applied that and will reboot in seconds